Electrical Electronics

DEPARTMENT OF ELECTRICAL ELECTRONICS ENGINEERING

I-CON UNIVERSAL POLYTECHNIC, OSOGBO.

INFORMATION HANDBOOK

JANUARY, 2020

GOAL AND AIM OF THE PROGRAMME

The National Diploma programme in Computer Science of I-Con universal Polytechnic is aimed to prepare students to design and create algorithmically complex software and develop new and effective algorithms to solve computing problems, design and implement software and device in new ways to use computer information Technology.

ADMISSION REQUIREMENTS

GENERAL ADDIMISSION REQUIREMENTS INTO NATIONAL DIPLOMA PROGRAMMES

The minimum entry requirements for the ND Programmes are as follows:

  1. SSCE/GCE ordinary level or its equivalent with credit level passes in five subjects relevant to the programme obtained at not more than two sittings:
  2. The National Technical Certificate (NTC)or National Business Certificate (NBC) with pass in a trade plus four relevant academic subjects.
  3. A satisfactory score in the UTME examination, which is conducted annually by JAMB.
  4. Holders of the Advanced National Technical Certificate (ANTC) may be given enhanced placement in the ND programmes and obtained good grades in the ANTC Examinations.

GENERAL ENTRY REQUIREMENTS FOR NATIONAL DIPLOMA PROGRAMMES

The minimum entry requirements into National Diploma Programmes are any of the following:

  1. SSCE/GCE ordinary level or its equivalent with credit level passes in five subjects relevant to the programme at not more than two sittings.
  2. Five credit level passes in relevant subjects obtained at the final examination of an NBTE recognized preliminary ND programme offered in a Polytechnic or Similar Post –Secondary Technical Institution.
  3. The National Technical Certificate (NTC) or National Business Certificate (NBC) with Credit level passes in five subjects relevant to the programme.
  4. In addition to 1-3 above, candidates must obtain a satisfactory score in the JAMB- UTME Examination which is conducted annually.
  5. A holder of the Advanced National Technical Certificate (ANTC) may be given enhanced placement in the ND Programme provided the Candidate has also met the minimum entry requirement into ND Programme and obtained a minimum of credit level grades in the ANTC Examinations.

Applicants for Business and Management Programmes: Candidates should have credit passes in English Language and Mathematics.

SPECIFIC ADMISSION REQUIREMENTS FOR NATIONAL DIPLOMA PROGRAMME IN ELECTRICAL ELECTRONICS ENGINEERING

  PROGRAMME WAEC NECO NABTEB
Electrical Electronics Engineering   English Language (not Literature in English) ,Mathematics, Physics, Chemistry and any other one Subject from the following: Economics/GeographyTechnical DrawingFurther MathematicsBasic ElectricityCivic Education   English Language (not Literature in English) ,Mathematics, Physics, Chemistry and any other one Subject from the following: Economics/GeographyTechnical DrawingFurther MathematicsBasic ElectricityCivic Education     English Language (not Literature in English) ,Mathematics, Physics, Chemistry and any other one Subject from the following: Economics/GeographyTechnical DrawingFurther MathematicsBasic Electricity  

CURRICULUM

The curriculum is structured in four semesters of classroom, studio/workshop activities in the institution and 3 to 4 month supervised industrial work experience scheme (SIWES) in a relevant industry. Each semester of institutional based activities shall be for duration of 17 weeks distributed as follows: 15 contact weeks of teaching; i.e. recitation, practical, quizzes, tests etc., and 2 weeks to be devoted for examination and registration.

14.0      CURRICULUM TABLE:

CURRICULUM FOR NATIONAL DIPLOMA IN ELECTRICAL /ELECTRONIC ENGINEERING TECHNOLOGY

YEAR ONE: 1ST SEMESTER

Course Code Course Title L T P CU CH
GNS 101 Use of English 2 0 0 2 2
MTH 112 Algebra and Elementary Trigonometry 1 1 0 2 2
SDV 201 Business Entrepreneurship 2 0 0 2 2
MEC 111 Technical Drawing 0 0 4 4 4
MEC 112 Basic Workshop Technology and Practice 1 0 2 3 3
EEC 114 Report Writing 1 0 3 4 4
EEC 112 Introduction to Computer Software 1 0 2 3 3
EEC 117 Computer Hardware I 1 0 2 3 3
EEC 111 Electrical Graphics 1 0 3 4 4
EEC 115 Electrical Engineering Science 1 1 0 2 3 3
  TOTAL 11 1 18 30 30

YEAR ONE: 2ND SEMESTER

Course Code Course Title L T P CU CH
GNS 102 Communication Skills I 2 0 0 2 2
MTH 211 Calculus 1 1 0 2 2
MEC 124 Machine Tools Technology & Practice 1 0 2 3 3
EEC 122 Electrical Power I 1 0 2 3 3
EEC 123 Electrical Machine I 1 0 2 3 3
EEC 124 Electronics I 1 0 2 3 3
EEC 125 Electrical Engineering Science II 1 0 2 3 3
EEC 126 Electrical and Electronic Instrument I 1 0 3 4 4
EEC 128 Telecommunications I 1 0 2 3 3
EEC 129 Electrical Installation of Building 1 0 2 3 3
  TOTAL 11 1 17 29 29

NATIONAL DIPLOMA TWO (ND II)

1st Semester

Course Code Course Title L T P CU CH
GNS 111 Citizen Education 2 0 0 2 2
MTH 202 Logic and Linear Algebra 1 1 0 2 2
EEC 232 Electrical Power II 1 0 2 3 3
EEC 233 Electrical Machines II 1 0 2 3 3
EEC 234 Electronics II 1 0 3 4 4
EEC 236 Electrical and Electronic Instrument II 1 0 2 3 3
EEC 238 Telecommunications II 1 0 2 3 3
EEC 239 Electric Circuit Theory I 1 0 2 3 3
SIT 219 SIWES 0 0 4 4 4
  TOTAL 9 1 17 27 27

NATIONAL DIPLOMA TWO (ND II)

2nd Semester

Course Code Course Title L T P CU CH
GNS 202 Communication Skills II 2 0 0 2 2
MTH 122 Trig. And Analytical Geometry 1 1 0 2 2
EEC 247 Computer Hardware II 1 0 2 3 3
EEC 242 Electrical Power III 1 0 2 3 3
EEC 244 Electronics III 1 0 3 4 4
EEC 249 Electric Circuit Theory II 1 0 2 3 3
EEC 280 Project 0 0 3 3 3
  TOTAL 7 1 12 20 20

SCORING PATTERN AND GRADING SYSTEM

MARKED RANGE LETTER GRADE WEIGHTING
75% – above A 4.00
70% – 74% AB 3.50
65% – 69% B 3.25
60% – 64% BC 3.00
55% – 59% C 2.75
50% – 54% CD 2.50
45% – 49% D 2.25
40% – 44% E 2.00
Below 40% F 0.00

13.0 STAFFING:

13.1 List all full time teaching staff available exclusively for the programme

  1. CORE STAFF
  Name Of Staff Designation Qualification With Dates Area of Specialization
  Olatuji Ibukun Francis     Lecturer II   M.Eng MECH B.Eng MECH 2001 Coren Registered 2020 Production
  Olla Moses .O.   Lecturer III B.Eng 2001 M.Eng 2014 Coren Telecommunication
  Olaniran Nureni Olawale   Assistant Lecturer ND, HND Elect-Elect. B.Sc Elect-Elect 2018.   Power and Machine
  Mr. Kehinde Olufunso K   Assistant Lecturer PGD Elect-Elect 2013 HND Elect-Elect 2005 ND2000 B.SC Chem. 2005 Coren (Member) Electronic S lab Machine Lab
  Odebunmi  Yemisi Instructor PGD Elect-Elect 2017 HND Elect-Elect 2013    
  Mr. Isaac .A. Akintunde Lecturer I HND Elect-Elect 1987 PGD Elect-Elect 1999 Coren 2004 Coren 2018  
  • TECHNICAL STAFF
  Mr. Adeosun Sharafadeen Alao Technologist I HND Elect-Elect 2008 Coren 2018 Mr. Adeosun Sharafadeen Alao
  Mr Gbadamosi Kazeem Kayode Principal Technologist PGD Elect-Elect 2009 HND Elect-Elect 1996 Coren 2014  
  Fatanmi Babtunde Seyi Technologist II HND Elect-Elect 2001    
  Ahmed Abdufatai Technologist II HND Elect-Elect 2007    
  Olawore Bamidele     Technologist II City and guilds Technician in Elect-Elect Engineering 1997 Technical Teachers Certificate (TTC) B.Sc. (Industrial Technology. 2003   High and Low power station power generation and distribution
  Ganiyu Sefiu Oyegbade Technologist HND 2004 PGD 2015  
  Oyeyemi Idowu Abiodun   Higher Technical Officer Federal Ministry of labour III, II, I certificate. 92 Federal Ministry of certificate provisional. 1994 Nigerian Association of Engineer certificate 2005 Professional. Metal Fabrication and students Practical Projects Maintenance and Repair.
  • SERVICE STAFF
Name of Staff Qualification with dates Designation Courses to be taught
Mr. Bamigboye Wale Abiodun B.PA (Public Adminitartion) Lecturer I Citizenship Education
Mr. Bamidele Anthony Adeleke B.A (Ed) English Language Lecturer I Use of English Communication in English
Mr. Babalola Kazeem Ajibola B.(Ed) Education Management Certificate from NIM (graduate member.) Diploma in Computer Desktop Publishing. Lecturer I Entrepreneurship Sociology
Mr. Opafunso John Olaniran   M.A(Ed) Mathematics. (Curriculum Studies)  B.Edu Mathematics  NCE Maths/ Physics Chief Lecturer  Calculus with Applications. Elementary Statistics. Business Statistics
Mr. Ayinde Liasu Adekunle   M.Sc. Statistics B.Sc. Statistics  Senior Lecturer Various Statistics Courses Descriptive Statistics Calculating I, II and Sampling Techniques.
  • ADMIN STAFF
Name of Staff Qualification with dates Designation
  Mr. Adebare Olarotimi Secretary II
     
  • WORKS AND MAINTENANCE DEPARTMENT
Name of Staff Qualification with dates Designation
  Badmus Olufemi Bamidele HOD
     

13.0 STAFFING:

13.1 List all full time teaching staff available exclusively for the programme

  • CORE STAFF
  Name Of Staff Designation Qualification With Dates Area of Specialization
  Olatuji Ibukun Francis     Lecturer II   M.Eng MECH B.Eng MECH 2001 Coren Registered 2020 Production
  Olla Moses .O.   Lecturer III B.Eng 2001 M.Eng 2014 Coren Telecommunication
  Olaniran Nureni Olawale   Assistant Lecturer ND, HND Elect-Elect. B.Sc Elect-Elect 2018.   Power and Machine
  Mr. Kehinde Olufunso K   Assistant Lecturer PGD Elect-Elect 2013 HND Elect-Elect 2005 ND2000 B.SC Chem. 2005 Coren (Member) Electronic S lab Machine Lab
  Odebunmi  Yemisi Instructor PGD Elect-Elect 2017 HND Elect-Elect 2013    
  Mr. Isaac .A. Akintunde Lecturer I HND Elect-Elect 1987 PGD Elect-Elect 1999 Coren 2004 Coren 2018  
  • TECHNICAL STAFF
  Mr. Adeosun Sharafadeen Alao Technologist I HND Elect-Elect 2008 Coren 2018 Mr. Adeosun Sharafadeen Alao
  Mr Gbadamosi Kazeem Kayode Principal Technologist PGD Elect-Elect 2009 HND Elect-Elect 1996 Coren 2014  
  Fatanmi Babtunde Seyi Technologist II HND Elect-Elect 2001    
  Ahmed Abdufatai Technologist II HND Elect-Elect 2007    
  Olawore Bamidele     Technologist II City and guilds Technician in Elect-Elect Engineering 1997 Technical Teachers Certificate (TTC) B.Sc. (Industrial Technology. 2003   High and Low power station power generation and distribution
  Ganiyu Sefiu Oyegbade Technologist HND 2004 PGD 2015  
  Oyeyemi Idowu Abiodun   Higher Technical Officer Federal Ministry of labour III, II, I certificate. 92 Federal Ministry of certificate provisional. 1994 Nigerian Association of Engineer certificate 2005 Professional. Metal Fabrication and students Practical Projects Maintenance and Repair.
  • SERVICE STAFF
Name of Staff Qualification with dates Designation Courses to be taught
Mr. Bamigboye Wale Abiodun B.PA (Public Adminitartion) Lecturer I Citizenship Education
Mr. Bamidele Anthony Adeleke B.A (Ed) English Language Lecturer I Use of English Communication in English
Mr. Babalola Kazeem Ajibola B.(Ed) Education Management Certificate from NIM (graduate member.) Diploma in Computer Desktop Publishing. Lecturer I Entrepreneurship Sociology
Mr. Opafunso John Olaniran   M.A(Ed) Mathematics. (Curriculum Studies)  B.Edu Mathematics  NCE Maths/ Physics Chief Lecturer  Calculus with Applications. Elementary Statistics. Business Statistics
Mr. Ayinde Liasu Adekunle   M.Sc. Statistics B.Sc. Statistics  Senior Lecturer Various Statistics Courses Descriptive Statistics Calculating I, II and Sampling Techniques.
  1. ADMIN STAFF
Name of Staff Qualification with dates Designation
  Mr. Adebare Olarotimi Secretary II